Dodge Charger: Automatic Climate Control Descriptions And Functions / Driver And Passenger Temperature Up And Down Buttons

Dodge Charger 2011-2026 Owner's Manual / GETTING TO KNOW YOUR VEHICLE / CLIMATE CONTROLS / Automatic Climate Control Descriptions And Functions / Driver And Passenger Temperature Up And Down Buttons

These buttons provide the driver and passenger with independent temperature control.

Dodge Charger. Driver And Passenger Temperature Up And Down Buttons Push the red button on the faceplate or touchscreen or press and slide the temperature bar towards the red arrow button on the touchscreen for warmer temperature settings.

https://ecufix.info

Dodge Charger. Driver And Passenger Temperature Up And Down Buttons Push the blue button on the faceplate or touchscreen or press and slide the temperature bar towards the blue arrow button on the touchscreen for cooler temperature settings.

Front Defrost Button, Rear Defrost Button

Front Defrost Button Press and release the Front Defrost button on the touchscreen, or push and release the button on the faceplate, to change the current airflow setting to Defrost mode...

SYNC Button, Blower Control

SYNC Button Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator illuminates when SYNC is on. SYNC synchronizes the passenger temperature setting with the driver temperature setting...

Other information:

Dodge Charger 2011-2026 Owner's Manual: Changing LaneSense Status

The LaneSense system has settings to adjust the intensity of the torque warning and the warning zone sensitivity (early/med/late) that you can configure through the Uconnect system. NOTE: When enabled the system operates above 37 mph (60 km/h) and below 112 mph (180 km/h)...

Dodge Charger 2011-2026 Owner's Manual: To Vary The Speed Setting

To Increase Or Decrease The Set Speed After setting a speed, you can increase the set speed by pushing the SET (+) button, or decrease speed by pushing the SET (-) button. U.S. Speed (mph) Pushing the SET (+), or SET (-) button once will result in a 1 mph speed adjustment...